Tandberg Data DPS Expansion Module Disk Pack Spezifikationen PDF herunterladen (Seite 10)

4 | Unpacking and Cabling DPS Expansion Module

• Two (2) ATX rack bracket assemblies universal

• One (1) 10 mm spanner (tapped hole rack)

• Anti-tamper lock tool

Additional items needed for installation

Gather the following items before you begin installing and configuring DPS Expansion

Module:

• Terminal or computer running a terminal emulation program

• Ethernet cable for controller enclosure

• SAS patch cable for each expansion module (in addition to the SAS patch cable shipped

with the enclosure)

Preparing DPS Expansion Module for mounting

Several plugin modules (such as the power supplies, the drive carriers, and so on) are

installed in the DPS Expansion Module enclosure. When fully populated, DPS Expansion

Module is very heavy (32 kg / 70.4 lb.). Because of this, it is highly recommended that you

remove the DPS Expansion Module plugin modules before you mount the enclosure in a rack

and that you use an assistant during the installation.Also, you may want to use an anti-static

wrist strap during installation.

WARNING

Observe all conventional ESD precautions when handling DPS Expansion

Module modules and components. Avoid contact with backplane components,

module connectors, and so on.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 67 68

Keine Kommentare

Tandberg Data DPS Expansion Module Disk Pack Spezifikationen Seite 10