Tandberg Data DPS Expansion Module Disk Pack Spezifikationen PDF herunterladen (Seite 26)

20 | Unpacking and Cabling DPS Expansion Module

5. Engage the anti-tamper locks as follows:

Note

The anti-tamper locks are fitted in the drive carrier handles and are accessed

through the small cutout in the latch section of the handle. Drives are supplied

with the locks set in the locked position.

a. Carefully insert the lock key provided into the cutout in the handle and into its socket.

b. Rotate the key in a clockwise direction until the red indicator is visible in the aperture

beside the key.

c. Remove the key.

The drive carrier modules are organized as follows:

For the DPS Expansion Module controller enclosure and any DPS Expansion Module

expansion enclosures shipped with the controller enclosure, the drives in the first and third

columns (1, 3, 5, 7, 9, and 11) are included in one array. If the enclosure shipped with six

drives, the drives in the second and final columns are dummy carriers. If the enclosure

shipped with 12 drives, the drives in the second and final columns (2, 4, 6, 8, 10, and 12) are

included in another array.

For additional expansion modules, you must configure these arrays as described in Installing

and Configuring Additional Enclosures on page 29.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 67 68

Keine Kommentare

Tandberg Data DPS Expansion Module Disk Pack Spezifikationen Seite 26