Tandberg Data DPS Expansion Module Disk Pack Spezifikationen PDF herunterladen (Seite 17)

Unpacking and Cabling DPS Expansion Module | 11

d. Tighten the two clamping screws located along the inside of the rear section of the

rack bracket.

5. Mount the enclosure in the rack as follows:

a. Using an assistant, lift the enclosure aligning it with the rack rails and carefully

insert the chassis slides into the rack rails.

b. Push the enclosure completely into the rack cabinet.

c. Tighten the rear rack bracket mounting screws. (They were previously left loose.)

d. Withdraw the enclosure until it reaches the hard stops (approximately 400 mm / 15.75

inches).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 67 68

Keine Kommentare

Tandberg Data DPS Expansion Module Disk Pack Spezifikationen Seite 17